You can throw away the small print produced during the cartridge alignment procedure. The two ends are different: Configuration B can be specified in the same way. Insert the spindle so that the large media stop is to the right and the small end cap to the left. HP Designjet C Plus printer:
|Date Added:||1 April 2017|
|File Size:||63.75 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Designjst the up or down arrow until the display shows the type of media you are loading; then press ENTER. Remove selected files Download files.
HP Designjet and C Plus Printers – Setting up the Printer | HP® Customer Support
The printer automatically trims off the first few inches of media. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in designjft with the instructions, may cause harmful interference to radio communications. Please try again shortly.
The HP Designjet printer is supplied with two black cartridges one is a spare cartridge. Print quality information Print quality.
If a Let’s identify your product to get started page displays, click Printertype your printer model number, and then click Submit. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Choose your driver disk sread the instructions on the label, and follow any printed instructions accompanying the disks.
HP DesignJet 700 Printer – Product Specifications
Insert the cartridge in the stall. If you choose the parallel interface, you may need a parallel interface card for your workstation.
It features the following:. Now you can set up the printer, completing each task explained in this document.
When using HP Coated Paper, you do not need to wait. After servicing, the message will disappear. Use only three-wire earth-grounded power cords with this designjdt. The printer moves the sheet in and out to check its size and alignment, and then advances it to the start of the page. If the front panel display says Reseat cartridge sthen remove the cartridge and insert it again.
You will also need the following items, which were not supplied with the printer: Check that you have all of the required items You eesignjet the following items, which were supplied with the printer:.
HP DesignJet c Plus Printer – Driver Downloads | HP® Customer Support
Contact your local HP dealer or HP service engineer to arrange to have your printer serviced. Push in firmly on both ends. Connect the other end of the cable to your computer. If media is not already loaded, load a roll or a sheet, as explained earlier in Task 4. Software and accessories Use the information in the table below to decide if you need to install and set up any of the software supplied with this printer or that are available as an option.
I don’t see my operating system. Select the desired files and choose ‘Download files’ to start a batch download.
The user may find useful the following booklet prepared by the FCC: Recommended cables Cables for PCs Interface type and computer. This product detection tool installs software on your Microsoft Windows device that allows HP to detect and gather data about your HP and Compaq products to provide quick access to support information and solutions. From a one-meter bystander position and with Print Quality set to Best. The software results page for your printer displays with the default operating system selected.
Gradually straighten the angle and push it in until it clicks into place. The printer itself keeps an internal count of total pages printed and total passes of the cartridge carriage.